|
|
|
|
Amplifiers »
Power Amplifiers »
Cyrus 8 Power Amplifier(black) |
Cyrus 8 Power Amplifier(black) |
|
|
The new 8 Power is the ideal partner for the new Cyrus Pre XPD. Or equally it will be a perfect match to bi-amp the Cyrus 8XPD Integrated Amplifier.
Both these combinations sound extremely good and offer outstanding value, not only sonically, but because the 8 power is so upgradeable. It can evolve from a stereo 60Wpch (8ohms) power amp all the way through to a powerful 220w (4ohms) mono amplifier.
In fact, this incredible design can also be upgraded further as we offer a factory upgrade to the next range up, the X power, which delivers even more performance. As you upgrade your hi-fi system, 8 Power evolves to meet your demands, adding power and finesse with each upgrade. You may run your new amp in stereo or mono, with or without the matching Cyrus PSX-R Power Supply. Uniquely, this chameleon-like quality is achieved without loss of performance common with lesser bridgeable amps. Auto start and auto power down, plus built-in (MC-Bus) system control compatibility, make this a truly intelligent power amp, ideal for high-performance audio systems or a Cyrus-quality AV system and is uniquely flexible when systems are upgraded.
The 8 Power is based on the same platform as the Cyrus X Power. Although primarily intended to partner our preamplifiers, such as Cyrus Pre XPD and Cyrus DAC XP+ the 8 Power, is ideal as an upgrade to our integrated amplifier range for bi-amping. The 8 Power packs several surprises, such as being able to be used as a high-power mono amplifier with a Cyrus Pre XPD in pre/power systems of up to 120W per (220watts into 4ohoms), when used with an external PSX-R regulated power supply. This ability to be so dynamic with the real impedances of modern loudspeaker designs is a very important reason why it sounds so good in "real" systems.
Specifications
Power output Stereo - 60W/CH (both driven into 8 Ohms) 90W/CH (both driven into 4 Ohms)
Power output Mono - 110W/CH (both driven into 8 Ohms) 150W/CH (both driven into 4 Ohms)
Power output stereo + PSX-R - 60W/CH (both driven into 8 Ohms) 110W/CH (both driven into 4 Ohms)
Power output mono + PSX-R - 125W/CH (both driven into 8 Ohms) 220W/CH (both driven into 4 Ohms)
Distortion - <0.002%, (1kHz into 8 Ohms) <0.01%, (20Hz-20kHz into 8 Ohms)
Frequency Response - -3 dB at 0.1Hz and 100kHz
Output Current - 30A peak
Sensitivity (RCA input) - 413mV (for 60W stereo into 8 Ohms)
Input impedance - 20Kohm
S/N Ratio - 112dBA (ref 60W)
Dimensions - (H x W x D) 73 x 215 x 360 (mm)
Weight - 4.6kg |
|
|
|
| |
