Ortofon HiFi OM5E (1/2 inch or P mount)

TECHNICAL DATA

OMP 5 E

• Output voltage at 1000 Hz, 5cm/sec. 4 mV
• Channel balance at 1 kHz 2 dB
• Channel separation at 1 kHz 22 dB
• Channel separation at 15 kHz 15 dB
• Frequency range 20-25.000 Hz
• Frequency response 20-20.000 Hz ± 2 dB F
• FIM distortion at recommended tracking force, DIN 45.542< 1% Tracking ability at 315Hz at recommended tracking force 55 um
• Compliance, dynamic, lateral 20 um/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 um
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,5 - 2,0g (15 - 20mN)
• Tracking force, recommended 1,75g (17,5mN)
• Tracking angle 20 degrees Internal impedance, DC resistance 750 Ohm
• Internal inductance 450 mH
• Recommended load resistance 47 kOhm
• Recommended load capacitance 200-600 pF
  
  Cartridge colour, body/stylus Black/Black
  
  Cartridge weight 6 g
  
  Replacement stylus unit
  Stylus 5 E
  
  
  TECHNICAL DATA

OM 5 E

• Output voltage at 1000 Hz, 5cm/sec. 4 mV
• Channel balance at 1 kHz 2 dB
• Channel separation at 1 kHz 22 dB
• Channel separation at 15 kHz 15 dB
• Frequency range 20-25.000 Hz
• Frequency response 20-20.000 Hz ± 2 dB
• FIM distortion at recommended tracking force, DIN 45.542< 1%
• Tracking ability at 315Hz at recommended tracking force 65 um
• Compliance, dynamic, lateral 20 um/mN
• Stylus type Elliptical
• Stylus tip radius r/R 8/18 um
• Equivalent stylus tip mass 0,5 mg
• Tracking force range 1,5-2,0 g (15-20 mN)
• Tracking force, recommended 1,75 g (17,5 mN)
• Tracking angle 20 degrees
• Internal impedance, DC resistance 750 Ohm
• Internal inductance 450 mH
• Recommended load resistance 47 kOhm
• Recommended load capacitance 200-600 pF
• Cartridge colour, body/stylus Black/Black
• Cartridge weight 5 g
• Replacement stylus unit
  Stylus 5 E