|
|
|
|
Speakers »
Active Subwoofers »
Monitor Audio GXW-15 (Bubinga) |
Monitor Audio GXW-15 (Bubinga) |
|
|
The GXW-15 is a brilliant example of state-of-the-art subwoofer design. In a gloriously glossy, rigid compact enclosure, we’ve installed an ultra-long throw 15 inch C-CAM bass driver, triple suspended for a full 38mm (1.5 inch) of linear excursion. Featuring a massive magnet structure, and under the DSP control of a 650W D2Audio* DSP controlled amplifier, this extraordinary deep bass generator brings a new dimension to bass, and reference results for SPL, dynamic control and headroom. It may deliver taut gut-churning bass all the way down to a seismic 18Hz, but the GXW-15 is also an intelligent design, featuring an advanced automatic room correction system called LEO* (Listening Environment Optimizer). LEO simply and automatically eliminates the detrimental bass boost of boundaries and corners through the use of a microphone and test tones. The GXW-15’s sealed enclosure and front firing driver make it easy to install. Calibration from the front-mounted controls and dimmable LED display is simple, even from a distant position. It’s equipped with a 12V trigger and remote control with four user EQ pre-sets.
- Ultra long throw 15 inch C-CAM driver featuring triple suspension
- Large black anodized 3 inch voice coil and double stack motor system provides high power handling and low distortion
- Carefully optimized motor system design to reduce heat and improve efficiency
- Powerful 650Watt DSP Controlled amplifier (D2 Audio*)
- Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
- 12V trigger - provides switching control from A.V amp or processor
- Rigid, 25mm (1 inch) thick M.D.F construct
- Heavy radial cabinet bracing with separate amplifier partition
- Front mounted control panel for easy access and viewing
- The LEO*Â system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
- Remote control with 4 user EQ settings
- Selected real wood veneer or high gloss piano finishes
*LEOTM and Listening Environment OptimizerTM are Trade Marks of D2Audio
LEOTM and D2Audio are Registered Trademarks of Intersil Corporation
| System Format: |
Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
|
| Low Frequency Limit: |
18 Hz
|
| Upper Frequency Limit: |
40 - 120 Hz Variable
|
Low Pass Filter Alignment:
|
Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) |
| Amplifier Power Output |
650 watts Continuous. 1200 watts (peak) |
Amplifier Classification
|
D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) |
| Equalisation |
4 Settings (Off/Music/Movie/Impact) |
| Phase Control |
0-90-180-270 degrees |
| Auto Sensing Input Level Requirements |
Line Level > 2mV. Standby after 10 minutes if no signal sensed |
| Digital Volume Level |
-60 to +10dB in 1dB increments |
| Drive Unit Complement |
1 x 15 inch C-CAM sub-woofer driver featuring triple suspension
3 inch long throw voice coil |
| 12V Trigger Input |
3.5mm mono jack socket |
| Connections |
Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied) |
| Input Impedance |
20 kohms |
| Dimensions (H x W x D) |
430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
|
| Grille Depth |
28 mm (1 1/8 Inches) |
| Weight (unpacked) |
35.3 kg (77.6 lbs) |
| Mains Input Voltage |
100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) |
| Electrical Certifications |
CE/CB/ETL/Fcc/ErP (Energy saving compliant) |
| Power Consumption |
Maximum 1000W. Standby < 0.5W (ErP Compliance) |
| Fuse Type |
20mm UL/VDE (Value is region specific) |
| IR Remote Control Code |
NEC SH6122 |
|
|
|
|
| |